Datasheet

 2009-2012 Microchip Technology Inc. DS70592D-page 247
PIC24HJXXXGPX06A/X08A/X10A
TABLE 24-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter No. Typical
(2)
Max
Doze
Ratio
Units Conditions
Doze Current (I
DOZE)
(1)
DC73a 11 35 1:2 mA
-40°C 3.3V 40 MIPSDC73f 11 30 1:64 mA
DC73g 11 30 1:128 mA
DC70a 42 50 1:2 mA
+25°C 3.3V 40 MIPSDC70f 26 30 1:64 mA
DC70g 25 30 1:128 mA
DC71a 41 50 1:2 mA
+85°C 3.3V 40 MIPSDC71f 25 30 1:64 mA
DC71g 24 30 1:128 mA
DC72a 42 50 1:2 mA
+125°C 3.3V 40 MIPSDC72f 26 30 1:64 mA
DC72g 25 30 1:128 mA
Note 1: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock active, OSC1 is driven with external square
wave from rail-to-rail with overshoot/undershoot < 250 mV
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
2: Data in the “Typ” column is at 3.3V, +25ºC unless otherwise stated.