Datasheet

PIC24HJXXXGPX06A/X08A/X10A

DS70592D-page 14  2009-2012 Microchip Technology Inc.

Referenced Sources

This device data sheet is based on the following

individual chapters of the “dsPIC33F/PIC24H Family

Reference Manual”. These documents should be

considered as the general reference for the operation

of a particular module or device feature.

• Section 1. “Introduction” (DS70197)

• Section 2. “CPU” (DS70204)

• Section 3. “Data Memory” (DS70202)

• Section 4. “Program Memory” (DS70203)

• Section 5. “Flash Programming” (DS70191)

• Section 6. “Interrupts” (DS70184)

• Section 7. “Oscillator” (DS70186)

• Section 8. “Reset” (DS70192)

• Section 9. “Watchdog Timer and Power-Saving Modes” (DS70196)

• Section 10. “I/O Ports” (DS70193)

• Section 11. “Timers” (DS70205)

• Section 12. “Input Capture” (DS70198)

• Section 13. “Output Compare” (DS70209)

• Section 16. “Analog-to-Digital Converter (ADC)” (DS70183)

• Section 17. “UART” (DS70188)

• Section 18. “Serial Peripheral Interface (SPI)” (DS70206)

• Section 19. “Inter-Integrated Circuit™ (I2C™)” (DS70195)

• Section 20. “Data Converter Interface (DCI)” (DS70288)

• Section 21. “Enhanced Controller Area Network (ECAN™)” (DS70185)

• Section 22. “Direct Memory Access (DMA)” (DS70182)

• Section 23. “CodeGuard™ Security” (DS70199)

• Section 24. “Programming and Diagnostics” (DS70207)

• Section 25. “Device Configuration” (DS70194)

Note: To access the documents listed below,

browse to the documentation section of

the PIC24HJ256GP610A product page

on the Microchip web site

(www.microchip.com) or by selecting a

family reference manual section from

the following list.

In addition to parameters, features, and