Datasheet

 2009-2012 Microchip Technology Inc. DS70592D-page 139
PIC24HJXXXGPX06A/X08A/X10A
REGISTER 10-3: PMD3: PERIPHERAL MODULE DISABLE CONTROL REGISTER 3
R/W-0 R/W-0 R/W-0 R/W-0 U-0 U-0 U-0 U-0
T9MD T8MD T7MD T6MD — — — —
bit 15 bit 8
U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0
— — — — — — I2C2MD AD2MD
(1)
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15 T9MD: Timer9 Module Disable bit
1 = Timer9 module is disabled
0 = Timer9 module is enabled
bit 14 T8MD: Timer8 Module Disable bit
1 = Timer8 module is disabled
0 = Timer8 module is enabled
bit 13 T7MD: Timer7 Module Disable bit
1 = Timer7 module is disabled
0 = Timer7 module is enabled
bit 12 T6MD: Timer6 Module Disable bit
1 = Timer6 module is disabled
0 = Timer6 module is enabled
bit 11-2 Unimplemented: Read as ‘0’
bit 1 I2C2MD: I2C2 Module Disable bit
1 = I2C2 module is disabled
0 = I2C2 module is enabled
bit 0 AD2MD: AD2 Module Disable bit
(1)
1 = AD2 module is disabled
0 = AD2 module is enabled
Note 1: The PCFGx bits will have no effect if the ADC module is disabled by setting this bit. In this case, all port
pins multiplexed with ANx will be in Digital mode.