Datasheet

PIC24HJXXXGPX06/X08/X10
DS80280G-page 6 © 2008 Microchip Technology Inc.
3. Module: 10-bit ADC
When the ADC module is configured for 10-bit
operation, the specifications in the data sheet are
not met for operation above 500 ksps.
For 500 ksps, the module meets specifications
except for Gain and Offset parameters AD23bb
and AD24bb.
For 600 ksps operation, the module specifications
are shown in Table 2.
Work around
None. Future versions of the silicon will support
the ADC performance stated in the data sheet.
TABLE 2: 600 KSPS OPERATION
Param No. Symbol Min Typical Max Units Conditions
AD17 RIN — — 200 Ohm 10-bit
ADC Accuracy – Measurements taken with External V
REF+/VREF-
AD20b Nr — 10 bits — Bits —
AD21b INL -2 — 2 LSB —
AD22b DNL -1.5 — 2 LSB —
AD23b GERR 1 3 6 LSB —
AD24b EOFF 1 2 5 LSB —
ADC Accuracy – Measurements taken with Internal V
REF+/VREF-
AD21bb INL -2 — 2 LSB —
AD22bb DNL -1.5 — 2 LSB —
AD23bb GERR 1 6 12 LSB —
AD24bb EOFF 2 5 10 LSB —
Dynamic Performance
AD33b FNYQ — — 300 KHz —
AD34b ENOB 8.5 9.7 9.8 Bits —
ADC Conversion Rate
AD56b FCNV — — 600 ksps —
AD57b TSAMP — 3 T
AD ———