Datasheet

PIC24FJ128GA310 FAMILY
DS39996F-page 170  2010-2011 Microchip Technology Inc.
REGISTER 11-3: ANSC: PORTC ANALOG FUNCTION SELECTION REGISTER
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8
U-0 U-0 U-0 R/W-1 U-0 U-0 U-0 U-0
— — — ANSC4
(1)
— — — —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-5 Unimplemented: Read as ‘0’
bit 4 ANSC4: Analog Function Selection bit
(1)
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 3-0 Unimplemented: Read as ‘0’
Note 1: This bit is not available in 64-pin and 80-pin devices.
REGISTER 11-4: ANSD: PORTD ANALOG FUNCTION SELECTION REGISTER
U-0 U-0 U-0 U-0 R/W-1 R/W-1 U-0 U-0
— — — — ANSD11 ANSD10 — —
bit 15 bit 8
R/W-1 R/W-1 U-0 U-0 U-0 U-0 U-0 U-0
ANSD7 ANSD6 — — — — — —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-12 Unimplemented: Read as ‘0’
bit 11 ANSD<11:10>: Analog Function Selection bit
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 9-8 Unimplemented: Read as ‘0’
bit 7-6 ANSD<7:6>: Analog Function Selection bit
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 5-0 Unimplemented: Read as ‘0’