Information

 2009-2013 Microchip Technology Inc. DS80000486H-page 9
PIC24FJ64GA104
2. Module: Electrical Characteristics
Changes, shown in bold, have been made to the
DC10 and DC18 rows in Ta bl e 28 -3 . The
updated table is shown below:
TABLE 28-3 DC CHARACTERISTICS: TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C < TA < +85°C for Industrial
-40°C <
TA < +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
Operating Voltage
DC10 Supply Voltage
V
DD VBORMIN — 3.6 V Regulator enabled
V
DD VDDCORE — 3.6 V Regulator disabled
V
DDCORE 2.0 — 2.75 V Regulator disabled
DC12 V
DR RAM Data Retention
Voltage
(2)
1.5 — — V
DC16 V
POR VDD Start Voltage
to Ensure Internal
Power-on Reset Signal
VSS ——V
DC17 S
VDD VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05 — — V/ms 0-3.3V in 0.1s
0-2.5V in 60 ms
DC18 V
BOR Brown-out Reset
Voltage
1.80 2.03 2.2 V 16 MHz (8 MIPS) operation is
supported until BOR is active
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and are not tested.
2: This is the limit to which V
DD can be lowered without losing RAM data.