Datasheet

 2010 Microchip Technology Inc. DS39951C-page 269
PIC24FJ64GA104 FAMILY
TABLE 28-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (I
IDLE)
(2)
DC41 67 100 A-40°C
2.0V
(3)
0.5 MIPS
DC41a 68 100 A+25°C
DC41b 74 100 A+85°C
DC41f 102 120 A+125
°C
DC41c 166 265 A-40°C
3.3V
(4)
DC41d 167 265 A+25°C
DC41e 177 265 A+85°C
DC41g 225 285 A+125
°C
DC40 125 180 A-40°C
2.0V
(3)
1 MIPS
DC40a 125 180 A+25°C
DC40b 125 180 A+85°C
DC40c 167 200 A+125°C
DC40d 210 350 A-40°C
3.3V
(4)
DC40e 210 350 A+25°C
DC40f 210 350 A+85°C
DC40g 305 370 A+125
°C
DC43 0.5 0.6 mA -40°C
2.0V
(3)
4 MIPS
DC43a 0.5 0.6 mA +25°C
DC43b 0.5 0.6 mA +85°C
DC43c 0.54 0.62 mA +125°C
DC43d 0.75 0.95 mA -40°C
3.3V
(4)
DC43e 0.75 0.95 mA +25°C
DC43f 0.75 0.95 mA +85°C
DC43g 0.8 0.97 mA +125
°C
DC47 2.6 3.3 mA -40°C
2.5V
(3)
16 MIPS
DC47a 2.6 3.3 mA +25°C
DC47b 2.6 3.3 mA +85°C
DC47f 2.7 3.4 mA +125°C
DC47c 2.9 3.5 mA -40°C
3.3V
(4)
DC47d 2.9 3.5 mA +25°C
DC47e 2.9 3.5 mA +85°C
DC47g 3.0 3.6 mA +125
°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: Base I
IDLE current is measured with the core off, OSCI driven with external square wave from rail to rail. All I/O
pins are configured as inputs and pulled to V
DD. MCLR = VDD; WDT and FSCM are disabled. No peripheral
modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator is disabled (DISVREG is tied to V
DD).
4: On-chip voltage regulator is enabled (DISVREG is tied to V
SS). Low-Voltage Detect (LVD) and Brown-out Detect
(BOD) are enabled.