Datasheet

PIC24FJ64GA104 FAMILY
DS39951C-page 268  2010 Microchip Technology Inc.
DC24 10.5 15.5 mA -40°C
2.5V
(3)
16 MIPS
DC24a 10.5 15.5 mA +25°C
DC24b 10.5 15.5 mA +85°C
DC24c 11.3 15.5 mA +125°C
DC24d 11.3 15.5 mA -40°C
3.3V
(4)
DC24e 11.3 15.5 mA +25°C
DC24f 11.3 15.5 mA +85°C
DC24g 11.3 15.5 mA +125°C
DC31 15.0 18.0 A -40°C
2.0V
(3)
LPRC (31 kHz)
DC31a 15.0 19.0 A+25°C
DC31b 20.0 36.0 A+85°C
DC31c 42.0 55.0 A +125°C
DC31d 57.0 120.0 A -40°C
3.3V
(4)
DC31e 57.0 125.0 A+25°C
DC31f 95.0 160.0 A+85°C
DC31g 114.0 180.0 A +125°C
TABLE 28-4: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an
impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSCI driven
with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to V
DD.
MCLR
= VDD; WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator is disabled (DISVREG is tied to V
DD).
4: On-chip voltage regulator is enabled (DISVREG is tied to V
SS). Low-Voltage Detect (LVD) and Brown-out
Detect (BOD) are enabled.