Datasheet

PIC24FJ64GA104 FAMILY
DS39951C-page 164  2010 Microchip Technology Inc.
bit 4-0 SYNCSEL<4:0>: Trigger/Synchronization Source Selection bits
11111 = This OC module
(1)
11110 = Reserved
11101 = Reserved
11100 = CTMU
(2)
11011 = A/D
(2)
11010 = Comparator 3
(2)
11001 = Comparator 2
(2)
11000 = Comparator 1
(2)
10111 = Input Capture 4
(2)
10110 = Input Capture 3
(2)
10101 = Input Capture 2
(2)
10100 = Input Capture 1
(2)
100xx = Reserved
01111 = Timer5
01110 = Timer4
01101 = Timer3
01100 = Timer2
01011 = Timer1
01010 = Input Capture 5
(2)
01001 = Reserved
01000 = Reserved
00111 = Reserved
00110 = Reserved
00101 = Output Compare 5
(1)
00100 = Output Compare 4
(1)
00011 = Output Compare 3
(1)
00010 = Output Compare 2
(1)
00001 = Output Compare 1
(1)
00000 = Not synchronized to any other module
REGISTER 14-2: OCxCON2: OUTPUT COMPARE x CONTROL REGISTER 2 (CONTINUED)
Note 1: Do not use an OC module as its own trigger source, either by selecting this mode or another equivalent
SYNCSEL setting.
2: Use these inputs as trigger sources only and never as sync sources.
3: These bits affect the rising edge when OCINV = 1. The bits have no effect when the
OCM bits (OCxCON1<1:0>) = 001.