Datasheet

 2010 Microchip Technology Inc. DS39951C-page 267
PIC24FJ64GA104 FAMILY
TABLE 28-4: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC21 0.24 0.395 mA -40°C
2.0V
(3)
0.5 MIPS
DC21a 0.25 0.395 mA +25°C
DC21b 0.25 0.395 mA +85°C
DC21f 0.3 0.395 mA +125°C
DC21c 0.44 0.78 mA -40°C
3.3V
(4)
DC21d 0.41 0.78 mA +25°C
DC21e 0.41 0.78 mA +85°C
DC21g 0.6 0.78 mA +125°C
DC20 0.5 0.75 mA -40°C
2.0V
(3)
1 MIPS
DC20a 0.5 0.75 mA +25°C
DC20b 0.5 0.75 mA +85°C
DC20c 0.6 0.75 mA +125°C
DC20d 0.75 1.4 mA -40°C
3.3V
(4)
DC20e 0.75 1.4 mA +25°C
DC20f 0.75 1.4 mA +85°C
DC20g 1.0 1.4 mA +125°C
DC23 2.0 3.0 mA -40°C
2.0V
(3)
4 MIPS
DC23a 2.0 3.0 mA +25°C
DC23b 2.0 3.0 mA +85°C
DC23c 2.4 3.0 mA +125°C
DC23d 2.9 4.2 mA -40°C
3.3V
(4)
DC23e 2.9 4.2 mA +25°C
DC23f 2.9 4.2 mA +85°C
DC23g 3.5 4.2 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an
impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSCI driven
with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to V
DD.
MCLR
= VDD; WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator is disabled (DISVREG is tied to V
DD).
4: On-chip voltage regulator is enabled (DISVREG is tied to V
SS). Low-Voltage Detect (LVD) and Brown-out
Detect (BOD) are enabled.