Datasheet

 2010-2013 Microchip Technology Inc. DS39881E-page 73
PIC24FJ64GA004 FAMILY
bit 2 OC1IE: Output Compare Channel 1 Interrupt Enable bit
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 1 IC1IE: Input Capture Channel 1 Interrupt Enable bit
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
bit 0 INT0IE: External Interrupt 0 Enable bit
(1)
1 = Interrupt request is enabled
0 = Interrupt request is not enabled
REGISTER 7-10: IEC0: INTERRUPT ENABLE CONTROL REGISTER 0 (CONTINUED)
Note 1: If INTxIE = 1, this external interrupt input must be configured to an available RPn pin. See Section 10.4
“Peripheral Pin Select (PPS)” for more information.