Datasheet
2010-2013 Microchip Technology Inc. DS39881E-page 235
PIC24FJ64GA004 FAMILY
TABLE 27-4: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C TA +85°C for Industrial
-40°C T
A +125°C for Extended
Parameter No. Typical
(1)
Max Units Conditions
Operating Current (I
DD): PMD Bits are Set
(2)
DC20 0.650 0.850 mA -40°C
2.0V
(3)
1 MIPS
DC20a 0.650 0.850 mA +25°C
DC20b 0.650 0.850 mA +85°C
DC20c 0.650 0.850 mA +125°C
DC20d 1.2 1.6 mA -40°C
3.3V
(4)
DC20e 1.2 1.6 mA +25°C
DC20f 1.2 1.6 mA +85°C
DC20g 1.2 1.6 mA +125°C
DC23 2.6 3.4 mA -40°C
2.0V
(3)
4 MIPS
DC23a 2.6 3.4 mA +25°C
DC23b 2.6 3.4 mA +85°C
DC23c 2.6 3.4 mA +125°C
DC23d 4.1 5.4 mA -40°C
3.3V
(4)
DC23e 4.1 5.4 mA +25°C
DC23f 4.1 5.4 mA +85°C
DC23g 4.1 5.4 mA +125°C
DC24 13.5 17.6 mA -40°C
2.5V
(3)
16 MIPS
DC24a 13.5 17.6 mA +25°C
DC24b 13.5 17.6 mA +85°C
DC24c 13.5 17.6 mA +125°C
DC24d 15 20 mA -40°C
3.3V
(4)
DC24e 15 20 mA +25°C
DC24f 15 20 mA +85°C
DC24g 15 20 mA +125°C
DC31 13 17 A-40°C
2.0V
(3)
LPRC (31 kHz)
DC31a 13 17 A+25°C
DC31b 20 26 A+85°C
DC31c 40 50 A +125°C
DC31d 54 70 A-40°C
3.3V
(4)
DC31e 54 70 A+25°C
DC31f 95 124 A+85°C
DC31g 120 260 A +125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the
current consumption. The test conditions for all I
DD measurements are as follows: OSCI driven with external square
wave from rail-to-rail. All I/O pins are configured as inputs and pulled to V
DD.
MCLR
= VDD; WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are operational. No
peripheral modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator is disabled (DISVREG tied to V
DD).
4: On-chip voltage regulator is enabled (DISVREG tied to V
SS). Low-Voltage Detect (LVD) and Brown-out Detect
(BOD) are enabled.