Datasheet

PIC24FJ64GA004 FAMILY

DS39881E-page 138  2010-2013 Microchip Technology Inc.

FIGURE 14-1: OUTPUT COMPARE x MODULE BLOCK DIAGRAM

Comparator

Output

Logic

OCM<2:0>

Output Enable

OCx

(1)

Set Flag bit

OCxIF

(1)

OCxRS

(1)

Mode Select

(4)

Note 1: Where ‘x’ is shown, reference is made to the registers associated with the respective Output Compare

Channels 1 through 5.

2: The OCFA pin controls the OC1-OC4 channels. The OCFB pin controls the OC5 channel.

3: Each output compare channel can use one of two selectable time bases. Refer to the device data sheet for

the time bases associated with the module.

4: This peripheral’s inputs and outputs must be assigned to an available RPn pin before use. Please see

Section 10.4 “Peripheral Pin Select (PPS)” for more information.

OCTSEL

1616

OCFA or OCFB

(2)

TMR Register Inputs

from Time Bases

(see Note 3)

Period Match Signals

from Time Bases

(see Note 3)

OCxR

(1)