Datasheet

 2010-2013 Microchip Technology Inc. DS39881E-page 13
PIC24FJ64GA004 FAMILY
OSCI 9 6 30 I ANA Main Oscillator Input Connection.
OSCO 10 7 31 O ANA Main Oscillator Output Connection.
PGEC1 5 2 22 I/O ST In-Circuit Debugger/Emulator and ICSP™ Programming
Clock.
PGEC2 22 19 9 I/O ST
PGEC3 14 12 42 I/O ST
PGED1 4 1 21 I/O ST In-Circuit Debugger/Emulator and ICSP Programming
Data.
PGED2 21 18 8 I/O ST
PGED3 15 11 41 I/O ST
PMA0 10 7 3 I/O ST/TTL Parallel Master Port Address Bit 0 Input (Buffered Slave
modes) and Output (Master modes).
PMA1 12 9 2 I/O ST/TTL Parallel Master Port Address Bit 1 Input (Buffered Slave
modes) and Output (Master modes).
PMA2 — — 27 O — Parallel Master Port Address (Demultiplexed Master
modes).
PMA3 — — 38 O —
PMA4 — — 37 O —
PMA5 — — 4 O —
PMA6 — — 5 O —
PMA7 — — 13 O —
PMA8 — — 32 O —
PMA9 — — 35 O —
PMA10 — — 12 O —
PMA11 — — — O —
PMA12 — — — O —
PMA13 — — — O —
PMBE 11 8 36 O — Parallel Master Port Byte Enable Strobe.
PMCS1 26 23 15 O — Parallel Master Port Chip Select 1 Strobe/Address Bit 14.
PMD0 23 20 10 I/O ST/TTL Parallel Master Port Data (Demultiplexed Master mode) or
Address/Data (Multiplexed Master modes).
PMD1 22 19 9 I/O ST/TTL
PMD2 21 18 8 I/O ST/TTL
PMD3 18 15 1 I/O ST/TTL
PMD4 17 14 44 I/O ST/TTL
PMD5 16 13 43 I/O ST/TTL
PMD6 15 12 42 I/O ST/TTL
PMD7 14 11 41 I/O ST/TTL
PMRD 24 21 11 O — Parallel Master Port Read Strobe.
PMWR 25 22 14 O — Parallel Master Port Write Strobe.
TABLE 1-2: PIC24FJ64GA004 FAMILY PINOUT DESCRIPTIONS (CONTINUED)
Function
Pin Number
I/O
Input
Buffer
Description
28-Pin
SPDIP/
SSOP/SOIC
28-Pin
QFN
44-Pin
QFN/TQFP
Legend: TTL = TTL input buffer ST = Schmitt Trigger input buffer
ANA = Analog level input/output I
2
C™ = I
2
C/SMBus input buffer
Note 1: Alternative multiplexing when the I2C1SEL Configuration bit is cleared.