Datasheet

PIC24FJ256GB110 FAMILY
DS39897C-page 58 2009 Microchip Technology Inc.
TABLE 4-28: SYSTEM REGISTER MAP
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
All
Resets
RCON 0740 TRAPR IOPUWR
CM PMSLP EXTR SWR SWDTEN WDTO SLEEP IDLE BOR POR Note 1
OSCCON 0742
COSC2 COSC1 COSC0 NOSC2 NOSC1 NOSC0 CLKLOCK IOLOCK LOCK CF POSCEN SOSCEN OSWEN Note 2
CLKDIV 0744 ROI DOZE2 DOZE1 DOZE0 DOZEN RCDIV2 RCDIV1 RCDIV0 CPDIV1 CPDIV0
0100
OSCTUN 0748
TUN5 TUN4 TUN3 TUN2 TUN1 TUN0 0000
REFOCON 074E ROEN
ROSSLP ROSEL RODIV3 RODIV2 RODIV1 RODIV0 0000
Legend: — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
Note 1: The Reset value of the RCON register is dependent on the type of Reset event. See Section 6.0 “Resets” for more information.
2: The Reset value of the OSCCON register is dependent on both the type of Reset event and the device configuration. See Section 8.0 “Oscillator Configuration” for more information.
TABLE 4-29: NVM REGISTER MAP
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
All
Resets
NVMCON 0760 WR WREN WRERR
—ERASE NVMOP3 NVMOP2 NVMOP1 NVMOP0 0000
(1)
NVMKEY 0766 NVMKEY Register<7:0> 0000
Legend: — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.
Note 1: Reset value shown is for POR only. Value on other Reset states is dependent on the state of memory write or erase operations at the time of Reset.
TABLE 4-30: PMD REGISTER MAP
File Name Addr Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
All
Resets
PMD1 0770 T5MD T4MD T3MD T2MD T1MD
I2C1MD U2MD U1MD SPI2MD SPI1MD ADC1MD 0000
PMD2 0772 IC8MD IC7MD IC6MD IC5MD IC4MD IC3MD IC2MD IC1MD OC8MD OC7MD OC6MD OC5MD OC4MD OC3MD OC2MD OC1MD 0000
PMD3 0774
CMPMD RTCCMD PMPMD CRCMD U3MD I2C3MD I2C2MD 0000
PMD4 0776
—UPWMMDU4MD REFOMD CTMUMD LVDMD USB1MD 0000
PMD5 0778
—IC9MD —OC9MD0000
PMD6 077A
SPI3MD 0000
Legend: — = unimplemented, read as ‘0’. Reset values are shown in hexadecimal.