Datasheet

PIC24FJ256GB110 FAMILY
DS39897C-page 316  2009 Microchip Technology Inc.
TABLE 29-6: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD)
(2)
DC60 0.1 1 A-40°C
2.0V
(3)
Base Power-Down Current
(5)
DC60a 0.15 1 A+25°C
DC60m 2.25 11 A+60°C
DC60b 3.7 18 A+85°C
DC60c 0.2 1.4 A-40°C
2.5V
(3)
DC60d 0.25 1.4 A+25°C
DC60n 2.6 16.5 A+60°C
DC60e 4.2 27 A+85°C
DC60f 3.6 10 A-40°C
3.3V
(4)
DC60g 4.0 10 A+25°C
DC60p 8.1 25.2 A+60°C
DC60h 11.0 36 A+85°C
DC61 1.75 3 A-40°C
2.0V
(3)
Watchdog Timer Current: IWDT
(5)
DC61a 1.75 3 A+25°C
DC61m 1.75 3 A+60°C
DC61b 1.75 3 A+85°C
DC61c 2.4 4 A-40°C
2.5V
(3)
DC61d 2.4 4 A+25°C
DC61n 2.4 4 A+60°C
DC61e 2.4 4 A+85°C
DC61f 2.8 5 A-40°C
3.3V
(4)
DC61g 2.8 5 A+25°C
DC61p 2.8 5 A+60°C
DC61b 2.8 5 A+85°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled high. WDT, etc., are all switched off, PMSLP bit is clear, and the Peripheral Module Disable (PMD)
bits for all unused peripherals are set.
3: On-chip voltage regulator disabled (ENVREG tied to VSS).
4: On-chip voltage regulator enabled (ENVREG tied to V
DD). Low-Voltage Detect (LVD) and Brown-out
Detect (BOD) are enabled.
5: The  current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.