Datasheet

PIC24FJXXXGA1/GB1

WINDIS CW1<6> Windowed WDT bit

1 = Watchdog Timer in Non-Window mode

0 = Watchdog Timer in Window mode; FWDTEN must be ‘1’

WPCFG CW3<14> Configuration Word Code Page Protection Select bit

1 = Last page (at the top of program memory) and Flash Configuration Words

are not protected

0 = Last page and Flash Configuration Words are code-protected

WPDIS CW3<13> Segment Write Protection Disable bit

1 = Segmented code protection disabled

0 = Segmented code protection enabled; protected segment defined by

WPEND, WPCFG and WPFPx Configuration bits

WPEND CW3<15> Segment Write Protection End Page Select bit

1 = Protected code segment lower boundary is at the bottom of program

memory (000000h); upper boundary is the code page specified by

WPFP8:WPFP0

0 = Protected code segment upper boundary is at the last page of program

memory; lower boundary is the code page specified by WPFP8:WPFP0

WPFP8:WPFP0 CW3<8:0> Protected Code Segment Boundary Page bits

Designates the 16K word program code page that is the boundary of the

protected code segment, starting with Page 0 at the bottom of program

memory

If WPEND =

Last address of designated code page is the upper boundary of the segment

If WPEND =

First address of designated code page is the lower boundary of the segment

TABLE 4-2: PIC24FJXXXGA1/GB1 CONFIGURATION BITS DESCRIPTION (CONTINUED)

Bit Field Register Description

Note 1: Available on PIC24FJXXXGB1XX devices only.

2: Available on PIC24FJXXXGA110 devices only. On other devices, always maintain this bit as ‘1’.