Datasheet

PIC24FJ256GA110 FAMILY
DS39905E-page 68 2010 Microchip Technology Inc.
TABLE 6-3: RESET DELAY TIMES FOR VARIOUS DEVICE RESETS
Reset Type Clock Source SYSRST Delay
System Clock
Delay
Notes
POR
(6)
EC TPOR
+ TPWRT + TRST 1, 2, 7
FRC, FRCDIV TPOR
+ TPWRT + TRST TFRC 1, 2, 3, 7
LPRC T
POR
+ TPWRT + TRST TLPRC 1, 2, 3, 7
ECPLL TPOR
+ TPWRT + TRST TLOCK 1, 2, 4, 7
FRCPLL TPOR
+ TPWRT + TRST TFRC + TLOCK 1, 2, 3, 4, 7
XT, HS, SOSC T
POR
+ TPWRT + TRST TOST 1, 2, 5, 7
XTPLL, HSPLL TPOR
+ TPWRT + TRST TOST + TLOCK 1, 2, 4, 5, 7
BOR EC TPWRT + TRST 2, 7
FRC, FRCDIV T
PWRT + TRST TFRC 2, 3, 7
LPRC TPWRT + TRST TLPRC 2, 3, 7
ECPLL TPWRT + TRST TLOCK 2, 4, 7
FRCPLL T
PWRT + TRST TFRC + TLOCK 2, 3, 4, 7
XT, HS, SOSC T
PWRT + TRST TOST 2, 5, 7
XTPLL, HSPLL TPWRT + TRST TFRC + TLOCK 2, 3, 4, 7
All Others Any Clock T
RST 7
Note 1: TPOR = Power-on Reset delay.
2: TPWRT = 64 ms nominal if regulator is disabled (ENVREG tied to VSS).
3: T
FRC and TLPRC = RC Oscillator start-up times.
4: TLOCK = PLL lock time.
5: TOST = Oscillator Start-up Timer (OST). A 10-bit counter waits 1024 oscillator periods before releasing the
oscillator clock to the system.
6: If Two-Speed Start-up is enabled, regardless of the Primary Oscillator selected, the device starts with
FRC, and in such cases, FRC start-up time is valid.
7: T
RST
= Internal State Reset Timer
Note: For detailed operating frequency and timing specifications, see Section 28.0 “Electrical Characteristics”.