Datasheet

PIC24FJ256GA110 FAMILY
DS39905E-page 276  2010 Microchip Technology Inc.
TABLE 28-6: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD): PMD Bits are Set, PMSLP Bit is ‘0’
(2)
DC60 0.1 1.0 A -40°C
2.0V
(3)
Base Power-Down Current
(5)
DC60a 0.15 1.0 A +25°C
DC60m 2.25 11 A +60°C
DC60b 3.7 18.0 A +85°C
DC60j 18.0 85.0 A +125°C
DC60c 0.2 1.4 A -40°C
2.5V
(3)
DC60d 0.25 1.4 A +25°C
DC60n 2.6 16.5 A +60°C
DC60e 4.2 27 A +85°C
DC60k 20.0 110 A +125°C
DC60f 3.6 10.0 A -40°C
3.3V
(4)
DC60g 4.0 10 A +25°C
DC60p 8.1 25.2 A +60°C
DC60h 11.0 36 A +85°C
DC60l 36.0 120 A +125°C
DC61 1.75 3 A -40°C
2.0V
(3)
Watchdog Timer Current: IWDT
(5)
DC61a 1.75 3 A +25°C
DC61m 1.75 3 A +60°C
DC61b 1.75 3 A +85°C
DC61j 3.5 6 A +125°C
DC61c 2.4 4 A -40°C
2.5V
(3)
DC61d 2.4 4 A +25°C
DC61n 2.4 4 A +60°C
DC61e 2.4 4 A +85°C
DC61k 4.8 8 A +125°C
DC61f 2.8 5 A -40°C
3.3V
(4)
DC61g 2.8 5 A +25°C
DC61p 2.8 5 A +60°C
DC61h 2.8 5 A +85°C
DC61l 5.6 10 A +125°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and pulled
high. WDT, etc., are all switched off.
3: On-chip voltage regulator disabled (ENVREG tied to V
SS).
4: On-chip voltage regulator enabled (ENVREG tied to V
DD).
5: The  current is the additional current consumed when the module is enabled. This current should be added to
the base I
PD current.