Datasheet

 2010 Microchip Technology Inc. DS39905E-page 275
PIC24FJ256GA110 FAMILY
DC51 4.3 13.0 A-40°C
2.0V
(3)
LPRC (31 kHz)
DC51a 4.5 13.0 A+25°C
DC51b 10 32 A+85°C
DC51c 40 115 A +125°C
DC51d 44 77 A-40°C
3.3V
(4)
DC51e 44 77 A+25°C
DC51f 70 132 A+85°C
DC51g 130 217 A +125°C
TABLE 28-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (IIDLE): Core Off, Clock On Base Current, PMD Bits are Set
(2)
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: Base I
IDLE current is measured with core off, clock on, all modules off and all of the Peripheral Module Disable
(PMD) bits are set.
3: On-chip voltage regulator disabled (ENVREG tied to V
SS).
4: On-chip voltage regulator enabled (ENVREG tied to V
DD).