Datasheet

 2010 Microchip Technology Inc. DS39905E-page 271
PIC24FJ256GA110 FAMILY
TABLE 28-3: DC CHARACTERISTICS: TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
Operating Voltage
DC10 Supply Voltage
V
DD VBOR — 3.6 V Regulator enabled
V
DD VDDCORE — 3.6 V Regulator disabled
VDDCORE 2.0 — 2.75 V Regulator disabled
DC12 V
DR RAM Data Retention
Voltage
(2)
1.5 — — V
DC16 V
POR VDD Start Voltage
to Ensure Internal
Power-on Reset Signal
VSS ——V
DC17 SVDD VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05 — — V/ms 0-3.3V in 0.1s
0-2.5V in 60 ms
BO10 VBOR Brown-Out Reset
Voltage
1.96 2.10 2.25 V
BO15 V
BHYS BOR Hysteresis —5—mV
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: This is the limit to which V
DD can be lowered without losing RAM data.