Datasheet

PIC24FJ256DA210 FAMILY
DS39969B-page 374  2010 Microchip Technology Inc.
TABLE 30-4: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.2V to 3.6V (unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC20D 0.8 1.3 mA -40°C
3.3V
(3)
1 MIPSDC20E 0.8 1.3 mA +25°C
DC20F 0.8 1.3 mA +85°C
DC23D 3.0 4.8 mA -40°C
3.3V
(3)
4 MIPSDC23E 3.0 4.8 mA +25°C
DC23F 3.0 4.8 mA +85°C
DC24D 12.0 18 mA -40°C
3.3V
(3)
16 MIPSDC24E 12.0 18 mA +25°C
DC24F 12.0 18 mA +85°C
DC31D 55 95 A -40°C
3.3V
(3)
LPRC (31 kHz)DC31E 55 95 A+25°C
DC31F 135 225 A+85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin
loading and switching rate, oscillator type, internal code execution pattern and temperature, also have an
impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSCI driven
with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to V
DD. MCLR =VDD;
WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are operational. No peripheral
modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator enabled (ENVREG tied to V
DD). Brown-out Reset (BOR) is enabled.