Datasheet

PIC24FJ256DA210 FAMILY
DS39969B-page 160  2010 Microchip Technology Inc.
REGISTER 10-2: ANSB: PORTB ANALOG FUNCTION SELECTION REGISTER
R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
ANSB15 ANSB14 ANSB13 ANSB12 ANSB11 ANSB10 ANSB9 ANSB8
bit 15 bit 8
R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
ANSB7 ANSB6 ANSB5 ANSB4 ANSB3 ANSB2 ANSB1 ANSB0
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-0 ANSB<15:0>: Analog Function Selection bits
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
REGISTER 10-3: ANSC: PORTC ANALOG FUNCTION SELECTION REGISTER
U-0 R/W-1 R/W-1 U-0 U-0 U-0 U-0 U-0
— ANSC14 ANSC13 — — — — —
bit 15 bit 8
U-0 U-0 U-0 R/W-1 U-0 U-0 U-0 U-0
— — — ANSC4
(1)
— — — —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15 Unimplemented: Read as ‘0’
bit 14-13 ANSC<14:13>: Analog Function Selection bits
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 12-5 Unimplemented: Read as ‘0’
bit 4 ANSC4: Analog Function Selection bit
(1)
1 = Pin is configured in Analog mode; I/O port read is disabled
0 = Pin is configured in Digital mode; I/O port read is enabled
bit 3-0 Unimplemented: Read as ‘0’
Note 1: This bit is not available on 64-pin devices (PIC24FJXXXDAX06).