Datasheet

PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
DS39997C-page 306 Preliminary © 2011-2012 Microchip Technology Inc.
TABLE 26-47: ADC MODULE SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions (see Note 6): 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol Characteristic Min. Typ Max. Units Conditions
Device Supply
AD01 AV
DD Module VDD Supply
(2,4)
Greater of
VDD – 0.3
or 2.9
— Lesser of
VDD + 0.3
or 3.6
V
—
AD02 AVSS Module VSS Supply
(2,5)
VSS – 0.3 — VSS + 0.3 V —
AD09 I
AD Operating Current — 7.0 9.0 mA See Note 1
Analog Input
AD12 V
INH Input Voltage Range
VINH
(2)
VINL —AVDD V This voltage reflects Sample
and Hold Channels 0, 1, 2,
and 3 (CH0-CH3), positive
input
AD13 VINL Input Voltage Range
V
INL
(2)
AVSS —AVSS + 1V V This voltage reflects Sample
and Hold Channels 0, 1, 2,
and 3 (CH0-CH3), negative
input
AD17 R
IN Recommended Imped-
ance of Analog Voltage
Source
(3)
——200Ω —
Note 1: These parameters are not characterized or tested in manufacturing.
2: These parameters are characterized, but are not tested in manufacturing.
3: These parameters are assured by design, but are not characterized or tested in manufacturing.
4: This pin may not be available on all devices, in which case, this pin will be connected to V
DD internally.
See the “Pin Diagrams” section for availability.
5: This pin may not be available on all devices, in which case, this pin will be connected to V
SS internally. See
the “Pin Diagrams” section for availability.
6: Overall functional device operation at V
BOR < VDD < VDDMIN is guaranteed but not characterized. All
device analog modules such as the ADC, etc., will function but with degraded performance below V
DDMIN.