Datasheet

PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104

FIGURE 26-9: MOTOR CONTROL PWM MODULE FAULT TIMING CHARACTERISTICS

FIGURE 26-10: MOTOR CONTROL PWM MODULE TIMING CHARACTERISTICS

FLTA1

PWMx

MP30

MP20

See Note 1

Note 1: For the logic state after a Fault, refer to the FAOVxH:FAOVxL bits in the PxFLTACON register.

PWMx

MP11 MP10

Note: Refer to Figure 26-1 for load conditions.

TABLE 26-28: MOTOR CONTROL PWM MODULE TIMING REQUIREMENTS

AC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ +85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Param

No.

Symbol Characteristic

(1)

Min Typ Max Units Conditions

MP10 TFPWM PWM Output Fall Time — — — ns See parameter DO32

MP11 T

RPWM PWM Output Rise Time — — — ns See parameter DO31

MP20

FD Fault Input ↓ to PWM

I/O Change

——50ns —

MP30 TFH Minimum Pulse Width 50 — — ns —

Note 1: These parameters are characterized by similarity, but are not tested in manufacturing.