Datasheet
© 2011-2012 Microchip Technology Inc. Preliminary DS39997C-page 263
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE 26-9: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter No. Typical
(1)
Max
Doze
Ratio
(2)
Units Conditions
Doze Current (I
DOZE)
(2)
– PIC24FJ16MC101/102 Devices
DC73a 13.2 17.2 1:2 mA
-40°C 3.3V 16 MIPSDC73f 4.7 6.2 1:64 mA
DC73g 4.7 6.2 1:128 mA
DC70a 13.2 17.2 1:2 mA
+25°C 3.3V 16 MIPSDC70f 4.7 6.2 1:64 mA
DC70g 4.7 6.2 1:128 mA
DC71a 13.2 17.2 1:2 mA
+85°C 3.3V 16 MIPSDC71f 4.7 6.2 1:64 mA
DC71g 4.7 6.2 1:128 mA
DC72a 13.2 17.2 1:2 mA
+125°C 3.3V 16 MIPSDC72f 4.7 6.2 1:64 mA
DC72g 4.7 6.2 1:128 mA
Doze Current (I
DOZE)
(2)
– PIC24FJ32MC101/102/104 Devices
DC73a 17.2 — 1:2 mA
-40°C 3.3V 16 MIPSDC73f 6.2 — 1:64 mA
DC73g 6.2 — 1:128 mA
DC70a 17.2 — 1:2 mA
+25°C
3.3V 16 MIPSDC70f 6.2 — 1:64 mA
DC70g 6.2 — 1:128 mA
DC71a 17.2 — 1:2 mA
+85°C
3.3V 16 MIPSDC71f 6.2 — 1:64 mA
DC71g 6.2 — 1:128 mA
DC72a 17.2 — 1:2 mA
+125°C
3.3V 16 MIPSDC72f 6.2 — 1:64 mA
DC72g 6.2 — 1:128 mA
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDOZE measurements are as follows:
• Oscillator is configured in EC mode, OSC1 is driven with external square wave from rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroes)
• CPU executing while(1) statement