Datasheet

© 2011-2012 Microchip Technology Inc. Preliminary DS39997C-page 261
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
Idle Current (IIDLE): Core OFF Clock ON Base Current
(2)
– PIC24FJ32MC101/102/104 Devices
DC40d 1.6 — mA -40°C
3.3V
LPRC (31 kHz)
(3)
DC40a 1.6 — mA +25°C
DC40b 1.6 — mA +85°C
DC40c 1.6 — mA +125°C
DC41d 1.1 — mA -40°C
3.3V 1 MIPS
(3)
DC41a 1.1 — mA +25°C
DC41b 1.1 — mA +85°C
DC41c 1.1 — mA +125°C
DC42d 1.6 — mA -40°C
3.3V 4 MIPS
(3)
DC42a 1.6 — mA +25°C
DC42b 1.6 — mA +85°C
DC42c 1.6 — mA +125°C
DC43a 2.6 — mA +25°C
3.3V 10 MIPS
(3)
2.6 —DC43d mA -40°C
DC43b 2.6 — mA +85°C
DC43c 2.6 — mA +125°C
DC44d 3.8 — mA -40°C
3.3V 16 MIPS
(3)
DC44a 3.8 — mA +25°C
DC44b 3.8 — mA +85°C
DC44c 3.8 — mA +125°C
TABLE 26-7: DC CHARACTERISTICS: IDLE CURRENT (IIDLE) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
2: Base Idle current is measured as follows:
• CPU core is off, oscillator is configured in EC mode, OSC1 is driven with external square wave from
rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration word
• External Secondary Oscillator (S
OSC) is disabled (i.e., SOSCO and SOSCI pins are configured as
digital I/O inputs)
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroed)
• The VREGS bit (RCON<8>) = 1
3: These parameters are characterized, but not tested in manufacturing.