Datasheet

© 2011-2012 Microchip Technology Inc. Preliminary DS39997C-page 259
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
Operating Current (IDD)
(2)
– PIC24FJ32MC101/102/104 Devices
DC20d 1.7 — mA -40°C
3.3V LPRC (31 kHz)
(3)
DC20a 1.7 — mA +25°C
DC20b 1.7 — mA +85°C
DC20c 1.7 — mA +125°C
DC21d 2.6 — mA -40°C
3.3V 1 MIPS
(3)
DC21a 2.6 mA +25°C—
DC21b 2.6 — mA +85°C
DC21c 2.6 — mA +125°C
DC22d 8.5 — mA -40°C
3.3V 4 MIPS
(3)
DC22a 8.5 — mA +25°C
DC22b 8.5 mA +85°C—
—DC22c 8.5 mA +125°C
DC23d 16 — mA -40°C
3.3V 10 MIPS
(3)
DC23a 16 — mA +25°C
DC23b 16 — mA +85°C
DC23c 16 — mA +125°C
DC24d 21 — mA -40°C
3.3V 16 MIPS
DC24a 21 mA +25°C—
DC24b 21 — mA +85°C
DC24c 21 — mA +125°C
TABLE 26-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
2: IDD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DD measurements are as follows:
• Oscillator is configured in EC mode, OSC1 is driven with external square wave from rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroed)
• CPU executing while(1) statement
3: These parameters are characterized, but not tested in manufacturing.