Datasheet

© 2011-2012 Microchip Technology Inc. Preliminary DS39997C-page 197
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
bit 0 DONE: ADC Conversion Status bit
1 = ADC conversion cycle is completed
0 = ADC conversion not started or in progress
Automatically set by hardware when ADC conversion is complete. Software can write ‘0’ to clear
DONE status (software not allowed to write ‘1’). Clearing this bit will NOT affect any operation in
progress. Automatically cleared by hardware at start of a new conversion.
REGISTER 19-1: AD1CON1: ADC1 CONTROL REGISTER 1 (CONTINUED)