Datasheet

© 2011-2012 Microchip Technology Inc. Preliminary DS39997C-page 257
PIC24FJ16MC101/102 AND PIC24FJ32MC101/102/104
TABLE 26-4: DC TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
Operating Voltage
DC10 V
DD Supply Voltage
(3)
3.0 — 3.6 V Industrial and Extended
DC12 V
DR RAM Data Retention Voltage
(2)
1.8 — — V —
DC16 VPOR VDD Start Voltage
to ensure internal
Power-on Reset signal
——VSS V—
DC17 SVDD VDD Rise Rate
to ensure internal
Power-on Reset signal
0.024 — — V/ms 0-2.4V in 0.1s
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: This is the limit to which VDD may be lowered without losing RAM data.
3: Overall functional device operation at V
BOR < VDD < VDDMIN is guaranteed but not characterized. All device
analog modules such as the ADC, etc., will function but with degraded performance below VDDMIN.
TABLE 26-5: ELECTRICAL CHARACTERISTICS: BOR
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol Characteristic Min
(1)
Typ Max Units Conditions
BO10 V
BOR BOR Event on VDD transition
high-to-low
2.40 2.48 2.55 V
See Note 2
Note 1: Parameters are for design guidance only and are not tested in manufacturing.
2: Overall functional device operation at VBOR < VDD < VDDMIN is guaranteed but not characterized. All
device analog modules such as the ADC, etc., will function but with degraded performance below V
DDMIN.