Datasheet

PIC24FJ64GA004 FAMILY
DS39881E-page 238  2010-2013 Microchip Technology Inc.
TABLE 27-6: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD): PMD Bits are Set, PMSLP Bit is ‘0’
(2)
DC60 0.1 1 A-40°C
2.0V
(3)
Base Power-Down Current
(5)
DC60a 0.15 1 A+25°C
DC60m 2.2 7.4 A+60°C
DC60b 3.7 12 A+85°C
DC60j 15 50 A +125°C
DC60c 0.2 1 A-40°C
2.5V
(3)
DC60d 0.25 1 A+25°C
DC60n 2.6 15 A+60°C
DC60e 4.2 25 A+85°C
DC60k 16 100 A +125°C
DC60f 3.3 9 A-40°C
3.3V
(4)
DC60g 3.5 10 A+25°C
DC60o 6.7 22 A+60°C
DC60h 9 30 A+85°C
DC60l 36 120 A +125°C
DC61 1.75 3 A-40°C
2.0V
(3)
Watchdog Timer Current: IWDT
(5)
DC61a 1.75 3 A+25°C
DC61m 1.75 3 A+60°C
DC61b 1.75 3 A+85°C
DC61j 3.5 6 A +125°C
DC61c 2.4 4 A-40°C
2.5V
(3)
DC61d 2.4 4 A+25°C
DC61n 2.4 4 A+60°C
DC61e 2.4 4 A+85°C
DC61k 4.8 8 A +125°C
DC61f 2.8 5 A-40°C
3.3V
(4)
DC61g 2.8 5 A+25°C
DC61o 2.8 5 A+60°C
DC61h 2.8 5 A+85°C
DC61l 5.6 10 A +125°C
Note 1: Data in the Typical column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled high. WDT, etc., are all switched off.
3: On-chip voltage regulator is disabled (DISVREG tied to V
DD).
4: On-chip voltage regulator is enabled (DISVREG tied to V
SS). Low-Voltage Detect (LVD) and Brown-out
Detect (BOD) are enabled.
5: The  current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.