Datasheet

 2010-2013 Microchip Technology Inc. DS39881E-page 237
PIC24FJ64GA004 FAMILY
DC51 4 6 A-40°C
2.0V
(3)
LPRC (31 kHz)
DC51a 4 6 A+25°C
DC51b 8 16 A+85°C
DC51c 20 50 A +125°C
DC51d 42 55 A-40°C
3.3V
(4)
DC51e 42 55 A+25°C
DC51f 70 91 A+85°C
DC51g 100 180 A +125°C
TABLE 27-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (I
IDLE): Core Off, Clock On Base Current, PMD Bits are Set
(2)
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: The test conditions for all I
IDLE measurements are as follows: OSCI driven with external square wave from
rail-to-rail. All I/O pins are configured as inputs and pulled to V
DD. MCLR = VDD; WDT and FSCM are disabled.
CPU, SRAM, program memory and data memory are operational. No peripheral modules are operating and all
of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator is disabled (DISVREG tied to V
DD).
4: On-chip voltage regulator is enabled (DISVREG tied to V
SS). Low-Voltage Detect (LVD) and Brown-out Detect
(BOD) are enabled.