Datasheet

PIC24FJ64GA004 FAMILY
DS39881E-page 236  2010-2013 Microchip Technology Inc.
TABLE 27-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (I
IDLE): Core Off, Clock On Base Current, PMD Bits are Set
(2)
DC40 150 200 A-40°C
2.0V
(3)
1 MIPS
DC40a 150 200 A+25°C
DC40b 150 200 A+85°C
DC40c 165 220 A +125°C
DC40d 250 325 A-40°C
3.3V
(4)
DC40e 250 325 A+25°C
DC40f 250 325 A+85°C
DC40g 275 360 A +125°C
DC43 0.55 0.72 mA -40°C
2.0V
(3)
4 MIPS
DC43a 0.55 0.72 mA +25°C
DC43b 0.55 0.72 mA +85°C
DC43c 0.60 0.8 mA +125°C
DC43d 0.82 1.1 mA -40°C
3.3V
(4)
DC43e 0.82 1.1 mA +25°C
DC43f 0.82 1.1 mA +85°C
DC43g 0.91 1.2 mA +125°C
DC47 3 4 mA -40°C
2.5V
(3)
16 MIPS
DC47a 3 4 mA +25°C
DC47b 3 4 mA +85°C
DC47c 3.3 4.4 mA +125°C
DC47d 3.5 4.6 mA -40°C
3.3V
(4)
DC47e 3.5 4.6 mA +25°C
DC47f 3.5 4.6 mA +85°C
DC47g 3.9 5.1 mA +125°C
DC50 0.85 1.1 mA -40°C
2.0V
(3)
FRC (4 MIPS)
DC50a 0.85 1.1 mA +25°C
DC50b 0.85 1.1 mA +85°C
DC50c 0.94 1.2 mA +125°C
DC50d 1.2 1.6 mA -40°C
3.3V
(4)
DC50e 1.2 1.6 mA +25°C
DC50f 1.2 1.6 mA +85°C
DC50g 1.3 1.8 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: The test conditions for all I
IDLE measurements are as follows: OSCI driven with external square wave from
rail-to-rail. All I/O pins are configured as inputs and pulled to V
DD. MCLR = VDD; WDT and FSCM are disabled.
CPU, SRAM, program memory and data memory are operational. No peripheral modules are operating and all
of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator is disabled (DISVREG tied to V
DD).
4: On-chip voltage regulator is enabled (DISVREG tied to V
SS). Low-Voltage Detect (LVD) and Brown-out Detect
(BOD) are enabled.