Information

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller TQFP 100 (14x14) 16-Bit 16 MHz I/O number 84

PIC24FJ256GA110 FAMILY

Clarifications/Corrections to the Data

Sheet:

In the Device Data Sheet (DS39905B), the following

clarifications and corrections should be noted. Any sili-

con issues related to the PIC24FJ256GA110 family will

be reported in a separate silicon errata. Please check

the Microchip web site for any existing issues.

1. Module: Electrical Characteristics

The following tables are changed with the new or

modified values shown in bold text:

•Table27-4:

DC Characteristics: Operating Current (I

DD)

•Table27-5:

DC Characteristics: Idle Current (i

IDLE)

•Table27-6:

DC Characteristics: Power-Down Current (I

PD)

PIC24FJ256GA110 Family Data Sheet Errata

Summary of content (12 pages)

PAGE 1
PIC24FJ256GA110 FAMILY PIC24FJ256GA110 Family Data Sheet Errata Clarifications/Corrections to the Data Sheet: In the Device Data Sheet (DS39905B), the following clarifications and corrections should be noted. Any silicon issues related to the PIC24FJ256GA110 family will be reported in a separate silicon errata. Please check the Microchip web site for any existing issues. © 2009 Microchip Technology Inc. 1.
PAGE 2
PIC24FJ256GA110 FAMILY TABLE 27-4: DC CHARACTERISTICS: OPERATING CURRENT (IDD) Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated) Operating temperature -40°C ≤ TA ≤ +85°C for Industrial DC CHARACTERISTICS Parameter No. Typical(1) Max Units Conditions Operating Current (IDD)(2) DC20 0.83 1.2 mA -40°C DC20a 0.83 1.2 mA +25°C DC20b 0.83 1.2 mA +85°C DC20d 1.1 1.7 mA -40°C DC20e 1.1 1.7 mA +25°C DC20f 1.1 1.7 mA +85°C DC23 3.3 4.5 mA -40°C DC23a 3.
PAGE 3
PIC24FJ256GA110 FAMILY TABLE 27-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE) Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated) Operating temperature -40°C ≤ TA ≤ +85°C for Industrial DC CHARACTERISTICS Parameter No. Typical(1) Max Units Conditions Idle Current (IIDLE)(2) DC40 220 310 μA -40°C DC40a 220 310 μA +25°C DC40b 220 310 μA +85°C DC40d 300 390 μA -40°C DC40e 300 390 μA +25°C DC40f 320 420 μA +85°C DC43 0.85 1.1 mA -40°C DC43a 0.85 1.
PAGE 4
PIC24FJ256GA110 FAMILY TABLE 27-6: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated) Operating temperature -40°C ≤ TA ≤ +85°C for Industrial DC CHARACTERISTICS Parameter No. Typical(1) Max Units Conditions Power-Down Current (IPD)(2) DC60 0.1 1.0 μA -40°C DC60a 0.15 1.0 μA +25°C DC60b 3.7 18.0 μA +85°C DC60c 0.2 1.4 μA -40°C DC60d 0.25 1.4 μA +25°C DC60e 4.2 27.0 μA +85°C DC60f 3.6 10.
PAGE 5
PIC24FJ256GA110 FAMILY 2. Module: Electrical Specifications 3. Module: Electrical Specifications DC specification, BO10, for the device Brown-out Reset voltage (VBOR), has been added to Table 27-3 of the device data sheet. It is shown in bold below (bold text from original table removed for clarity). TABLE 27-3: DC CHARACTERISTICS: TEMPERATURE AND VOLTAGE SPECIFICATIONS Standard Operating Conditions: 2.0V to 3.
PAGE 6
PIC24FJ256GA110 FAMILY 4. Module: Pin Diagrams In the 64-pin device pin diagram on page 2, the reference to SCK1 on pin 35 is deleted. The correct complete designation for this pin is “RPI45/ INT0/CN72/RF6”. The SCK1 function is available only through Peripheral Pin Select (PPS), and is not permanently multiplexed to any one pin on this device. 5. Module: Memory Organization (SFR Space) 6.
PAGE 7
© 2009 Microchip Technology Inc. TABLE 3-5: File Name INTERRUPT CONTROLLER REGISTER MAP (PARTIAL REPRESENTATION) Addr Bit 15 INTCON1 0080 INTCON2 0082 Legend: Bit 13 Bit 12 Bit 11 Bit 10 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 NSTDIS — — — — — — — — — — ALTIVT DISI — — — — — — — — — Bit 4 Bit 3 Bit 2 Bit 1 MATHERR ADDRERR STKERR OSCFAIL INT4EP INT3EP Bit 0 All Resets — 0000 INT2EP INT1EP INT0EP 0000 — = unimplemented, read as ‘0’.
PAGE 8
PIC24FJ256GA110 FAMILY 7. Module: Interrupt Controller 8. Module: Timer2/3 and Timer4/5 In Register 6-4 (INTCON2), bits 4 and 3 of INTCON2, currently shown as unimplemented, are in fact implemented as INT4EP and INT3EP, respectively. In the bulleted list in the 3rd paragraph of Section 11.0 “Timer2/3 and Timer4/5”, it is stated that the ADC event trigger is only associated with Timer4/5. In fact, the trigger is only associated with Timer2/3.
PAGE 9
PIC24FJ256GA110 FAMILY 9. Module: 10-Bit High-Speed A/D Converter In Register 20-1 (AD1CON1), the descriptions provided for the various combinations of the SSRC<2:0> bits (ADCON1<7:5>) are incorrect. Specifically, while the number and type of trigger sources are reported correctly, several are associated with the wrong bit combinations. The correct order of trigger sources is listed below (changes in bold). REGISTER 20-1: bit 7-5 10.
PAGE 10
PIC24FJ256GA110 FAMILY REVISION HISTORY Rev A Document (7/2008) Initial release of this data sheet errata. Includes Data Sheet Clarification 1 (Electrical Characteristics). Rev B Document (1/2009) Added Data Sheet Clarifications 2-3 (Electrical Characteristics), 4 (Pin Diagrams), 5-6 (Memory Organization), 7 (Interrupt Controller), 8 (Timer2/3 and Timer4/5), 9 (10-Bit High-Speed A/D Converter) and 10 (Special Features). DS80385B-page 10 © 2009 Microchip Technology Inc.
PAGE 11
Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature.
PAGE 12
WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://support.microchip.com Web Address: www.microchip.