Datasheet

 2005-2012 Microchip Technology Inc. DS39747F-page 227
PIC24FJ128GA010 FAMILY
27.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24FJ128GA010 AC characteristics and timing parameters.
TABLE 27-15: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 27-2: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
TABLE 27-16: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
AC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Operating voltage V
DD range as described in Section 27.1 “DC Characteristics”.
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
DO50 C
OSC2 OSC2/CLKO Pin — — 15 pF In XT and HS modes when
external clock is used to drive
OSC1
DO56 CIO All I/O Pins and OSC2 — — 50 pF EC mode
DO58 C
B SCLx, SDAx — — 400 pF In I
2
C™ mode
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
VDD/2
CL
RL
Pin
Pin
VSS
VSS
CL
RL = 464
C
L = 50 pF for all pins except OSC2
15 pF for OSC2 output
Load Condition 1 – for all pins except OSC2 Load Condition 2 – for OSC2