Datasheet

 2005-2012 Microchip Technology Inc. DS39747F-page 219
PIC24FJ128GA010 FAMILY
TABLE 27-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC20 1.6 4.0 mA -40°C
2.5V
(3)
1 MIPS
DC20a 1.6 4.0 mA +25°C
DC20b 1.6 4.0 mA +85°C
DC20d 1.6 4.0 mA -40°C
3.6V
(4)
DC20e 1.6 4.0 mA +25°C
DC20f 1.6 4.0 mA +85°C
DC23 6.0 12 mA -40°C
2.5V
(3)
4 MIPS
DC23a 6.0 12 mA +25°C
DC23b 6.0 12 mA +85°C
DC23d 6.0 12 mA -40°C
3.6V
(4)
DC23e 6.0 12 mA +25°C
DC23f 6.0 12 mA +85°C
DC24 20 32 mA -40°C
2.5V
(3)
16 MIPS
DC24a 20 32 mA +25°C
DC24b 20 32 mA +85°C
DC24d 20 32 mA -40°C
3.6V
(4)
DC24e 20 32 mA +25°C
DC24f 20 32 mA +85°C
DC31 70 150 A -40°C
2.5V
(3)
LPRC (31 kHz)
DC31a 100 200 A+25°C
DC31b 200 400 A+85°C
DC31d 70 150 A -40°C
3.6V
(4)
DC31e 100 200 A+25°C
DC31f 200 400 A+85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail-to-rail. All I/O pins are configured as inputs and pulled to V
DD.
MCLR
= VDD; WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are
operational. No peripheral modules are operating and PMD bits are set.
3: On-chip voltage regulator is disabled (ENVREG tied to V
SS).
4: On-chip voltage regulator is enabled (ENVREG tied to V
DD).