Datasheet

 2005-2012 Microchip Technology Inc. DS39747F-page 159
PIC24FJ128GA010 FAMILY
REGISTER 18-6: PADCFG1: PAD CONFIGURATION CONTROL REGISTER
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8
U-0 U-0 U-0 U-0 U-0 U-0 R/W-0 R/W-0
— — — — — — RTSECSEL
(1)
PMPTTL
(2)
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-2 Unimplemented: Read as ‘0’
bit 1 RTSECSEL: RTCC Seconds Clock Output Select bit
(1)
1 = RTCC Seconds Clock is selected for the RTCC pin
0 = RTCC Alarm Pulse is selected for the RTCC pin
bit 0 PMPTTL: PMP Module TTL Input Buffer Select bit
(2)
1 = PMP module uses TTL input buffers
0 = PMP module uses Schmitt input buffers
Note 1: To enable the actual RTCC output, the RTCOE (RCFGCAL<10>) bit needs to be set.
2: Refer to Table 1-2 for affected PMP inputs.