Datasheet

 2010 Microchip Technology Inc. DS39969B-page 375
PIC24FJ256DA210 FAMILY
TABLE 30-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.2V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (I
IDLE)
(2)
DC40D 170 320 A-40°C
3.3V
(3)
1 MIPSDC40E 170 320 A+25°C
DC40F 220 380 A+85°C
DC43D 0.6 1.2 mA -40°C
3.3V
(3)
4 MIPSDC43E 0.6 1.2 mA +25°C
DC43F 0.7 1.2 mA +85°C
DC47D 2.3 4.8 mA -40°C
3.3V
(3)
16 MIPSDC47E 2.3 4.8 mA +25°C
DC47F 2.4 4.8 mA +85°C
DC50D 0.8 1.8 mA -40°C
3.3V
(3)
FRC (4 MIPS)
DC50E 0.8 1.8 mA +25°C
DC50F 1.0 1.8 mA +85°C
DC51D 40.0 85 A-40°C
3.3V
(3)
LPRC (31 kHz)
DC51E 40.0 85 A+25°C
DC51F 120.0 210 A+85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Base I
IDLE current is measured with the core off; OSCI driven with external square wave from rail to rail.
All I/O pins are configured as inputs and pulled to V
DD. MCLR = VDD; WDT and FSCM are disabled. No
peripheral modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
3: On-chip voltage regulator enabled (ENVREG tied to V
DD). Brown-out Reset (BOR) is enabled.