Datasheet

PIC24FV32KA304 FAMILY
DS39995D-page 352  2011-2013 Microchip Technology Inc.
Revision D (March 2013)
Throughout the data sheet: corrected the name of
RCON register bit 12 as RETEN, to maintain consis-
tency with other PIC24F devices (was previously
LVREN). In addition, changed the description of the bit
in the RCON register (Register 7-1) to clarify its
function in controlling the Retention Regulator.
Throughout the data sheet: corrected the name of
FPOR Configuration register bit 2 as RETCFG, to
maintain consistency with other PIC24F devices (was
previously LVRCFG). In addition, changed the descrip-
tion of the bit in the FPOR Configuration register
(Register 26-6) to clarify its function in enabling the
Retention Regulator.
For Section 10.4 “Voltage Regulator-Based
Power-Saving Features”:
• Removed all references to Fast Wake-up Sleep
mode, not implemented in this device
• Changed all references of the High-Voltage
Regulator to On-Chip Voltage Regulator
• Removed all references to the Low-Voltage
Regulator, which was replaced in most cases with
Retention Regulator
• Clarified the Retention Regulator’s operation in
Section 10.4.3 “Retention Sleep Mode”
(formerly “Low-Voltage Sleep Mode”)
• Modified Table 10-1 for consistency with the
above changes
Corrects Section 26.2 “On-Chip Voltage Regulator”
to clarify the operation of the on-chip regulator in “F”
and “FV” families, and include DC parameters and
specifications.
For Section 29.0 “Electrical Characteristics”:
• Updated captioning on all specification tables to
include extended temperature data
• Amended Ta b l e 29-8 to include +125°C data for
all existing specifications
• Added new Table 29-27 and Figure 29-8 to char-
acterize external clock input specifications for
general purpose timers (all subsequent tables and
figures are renumbered accordingly)
• Added parameter numbers to several existing but
previous unnumbered parameters in multiple
tables
Updated Section 30.0 “DC and AC Characteristics
Graphs and Tables”:
• Added additional graphs for Extended tempera-
ture devices (Section 30.2 “Characteristics for
Extended Temperature Devices (-40°C to
+125°C)”, Figure 30-40 through Figure 30-56)
•Replaced Figure 30-32 with an updated graph
Replaced some of the packaging diagrams in
Section 31.0 “Packaging Information” with the
newly revised diagrams.
Updates Product Information System to include
extended temperature devices in the information key.
Other minor typographic corrections throughout.