Datasheet

PIC24FV32KA304 FAMILY
DS39995D-page 272  2011-2013 Microchip Technology Inc.
TABLE 29-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V PIC24F32KA3XX
2.0V to 5.5V PIC24FV32KA3XX
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Sym Characteristic Min Typ
(1)
Max Units Conditions
V
IL Input Low Voltage
(4)
DI10 I/O Pins VSS —0.2 VDD V
DI15 MCLR
VSS —0.2 VDD V
DI16 OSCI (XT mode) VSS —0.2 VDD V
DI17 OSCI (HS mode) VSS —0.2 VDD V
DI18 I/O Pins with I
2
C™ Buffer VSS —0.3 VDD V SMBus is disabled
DI19 I/O Pins with SMBus Buffer VSS — 0.8 V SMBus is enabled
VIH Input High Voltage
(4)
DI20 I/O Pins:
with Analog Functions
Digital Only
0.8 V
DD
0.8 VDD
—
—
VDD
VDD
V
V
DI25 MCLR
0.8 VDD —VDD V
DI26 OSCI (XT mode) 0.7 VDD —VDD V
DI27 OSCI (HS mode) 0.7 VDD —VDD V
DI28 I/O Pins with I
2
C Buffer:
with Analog Functions
Digital Only
0.7 V
DD
0.7 VDD
—
—
VDD
VDD
V
V
DI29 I/O Pins with SMBus 2.1 — V
DD V2.5V  VPIN  VDD
DI30 ICNPU CNx Pull-up Current 50 250 500 AVDD = 3.3V, VPIN = VSS
IIL Input Leakage
Current
(2,3)
DI50 I/O Ports — 0.05 0.1 AVSS  VPIN  VDD,
Pin at high-impedance
DI55 MCLR
——0.1AVSS VPIN VDD
DI56 OSCI — — 5 AVSS VPIN VDD,
XT and HS modes
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The leakage current on the MCLR
pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Refer to Tab l e 1 - 3 for I/O pin buffer types.