Datasheet

 2011-2013 Microchip Technology Inc. DS39995D-page 199
PIC24FV32KA304 FAMILY
20.0 32-BIT PROGRAMMABLE
CYCLIC REDUNDANCY CHECK
(CRC) GENERATOR
The programmable CRC generator provides a
hardware implemented method of quickly generating
checksums for various networking and security
applications. It offers the following features:
• User-programmable CRC polynomial equation,
up to 32 bits
• Programmable shift direction (little or big-endian)
• Independent data and polynomial lengths
• Configurable interrupt output
• Data FIFO
A simplified block diagram of the CRC generator is
shown in Figure 20-1. A simple version of the CRC shift
engine is shown in Figure 20-2.
FIGURE 20-1: CRC BLOCK DIAGRAM
FIGURE 20-2: CRC SHIFT ENGINE DETAIL
Note: This data sheet summarizes the features of
this group of PIC24F devices. It is not
intended to be a comprehensive reference
source. For more information, refer to the
“PIC24F Family Reference Manual”,
Section 41. “32-Bit Programmable Cyclic
Redundancy Check (CRC)” (DS39729).
Variable FIFO
(4x32, 8x16 or 16x8)
CRCDATH
CRCDATL
Shift Buffer
CRC Shift Engine
CRCWDATH CRCWDATL
LENDIAN
10
CRCISEL
1
0
FIFO Empty Event
Shift Complete Event
Set CRCIF
2 * FCY Shift Clock
CRCWDATH CRCWDATL
Bit 0 Bit 1
Bit n
(2)
X(1)
(1)
Read/Write Bus
Shift Buffer
Data
Bit 2
X(2)
(1)
X(n)
(1)
Note 1: Each XOR stage of the shift engine is programmable; see text for details.
2: Polynomial Length n is determined by ([PLEN<4:0>] + 1).