Datasheet

 2011-2013 Microchip Technology Inc. DS39995D-page 145
PIC24FV32KA304 FAMILY
REGISTER 13-2: TyCON: TIMER3 AND TIMER5 CONTROL REGISTER
R/W-0 U-0 R/W-0 U-0 U-0 U-0 U-0 U-0
TON
(1)
—TSIDL
(1)
— — — — —
bit 15 bit 8
U-0 R/W-0 R/W-0 R/W-0 U-0 U-0 R/W-0 U-0
—TGATE
(1)
TCKPS1
(1)
TCKPS0
(1)
— —TCS
(1)
—
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15 TON: Timery On bit
(1)
1 = Starts 16-bit Timery
0 = Stops 16-bit Timery
bit 14 Unimplemented: Read as ‘0’
bit 13 TSIDL: Timery Stop in Idle Mode bit
(1)
1 = Discontinues module operation when device enters Idle mode
0 = Continues module operation in Idle mode
bit 12-7 Unimplemented: Read as ‘0’
bit 6 TGATE: Timery Gated Time Accumulation Enable bit
(1)
When TCS = 1:
This bit is ignored.
When TCS =
0:
1 = Gated time accumulation is enabled
0 = Gated time accumulation is disabled
bit 5-4 TCKPS<1:0>: Timery Input Clock Prescale Select bits
(1)
11 = 1:256
10 = 1:64
01 = 1:8
00 = 1:1
bit 3-2 Unimplemented: Read as ‘0’
bit 1 TCS: Timery Clock Source Select bit
(1)
1 = External clock is from the T3CK pin (on the rising edge)
0 = Internal clock (F
OSC/2)
bit 0 Unimplemented: Read as ‘0’
Note 1: When 32-bit operation is enabled (TxCON<3> = 1), these bits have no effect on Timery operation. All timer
functions are set through the TxCON register.