Datasheet

PIC24F16KA102 FAMILY
DS39927C-page 224  2008-2011 Microchip Technology Inc.
TABLE 29-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD): PMD Bits are Set, PMSLP Bit is ‘0’
(2)
DC60
0.025
0.200
A
-40°C
1.8V
Base Power-Down Current
(Sleep)
(3)
DC60a 0.200 +25°C
DC60b 0.870 +60°C
DC60c 1.350 +85°C
DC60d 10.00 +125°C
DC60e
0.105
0.540
A
-40°C
3.3V
DC60f 0.540 +25°C
DC60g 1.680 +60°C
DC60h 2.450 +85°C
DC60i 11.00 +125°C
DC70
0.020
0.150
A
-40°C
1.8V
Base Deep Sleep Current
DC70a 0.150 +25°C
DC70b 0.430 +60°C
DC70c 0.630 +85°C
DC70d 3.00 +125°C
DC70e
0.035
0.300
A
-40°C
3.3V
DC70f 0.300 +25°C
DC70g 0.700 +60°C
DC70h 0.980 +85°C
DC70i 5.00 +125°C
DC61
0.55
0.65
A
-40°C
1.8V
Watchdog Timer Current (WDT)
(3,4)
DC61a 0.65 +25°C
DC61b 0.65 +60°C
DC61c 0.65 +85°C
DC61d 1.20 +125°C
DC61e
0.87
0.95
A
-40°C
3.3V
DC61f 0.95 +25°C
DC61g 0.95 +60°C
DC61h 0.95 +85°C
DC61i 1.50 +125°C
Note 1: Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as outputs and set low.
WDT, etc., are all switched off.
3: The  current is the additional current consumed when the module is enabled. This current should be added to
the base I
PD current.
4: Current applies to Sleep only.
5: Current applies to Sleep and Deep Sleep.
6: Current applies to Deep Sleep only.