Datasheet

 2008-2011 Microchip Technology Inc. DS39927C-page 231
PIC24F16KA102 FAMILY
29.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24F16KA102 family AC characteristics and timing parameters.
TABLE 29-17: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 29-4: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
TABLE 29-18: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
AC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Operating voltage V
DD range as described in Section 29.1 “DC Characteristics”.
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
DO50 C
OSC2 OSCO/CLKO pin — — 15 pF In XT and HS modes when
external clock is used to drive
OSCI
DO56 C
IO All I/O Pins and OSCO — — 50 pF EC mode
DO58 CB SCLx, SDAx — — 400 pF In I
2
C™ mode
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
VDD/2
C
L
RL
Pin
Pin
V
SS
VSS
CL
RL = 464
C
L = 50 pF for all pins except OSCO
15 pF for OSCO output
Load Condition 1
– for all pins except OSCO Load Condition 2 – for OSCO