Datasheet

PIC24F16KA102 FAMILY
DS39927C-page 226  2008-2011 Microchip Technology Inc.
DC70
0.045
0.200
A
-40°C
1.8V
LPBOR
(3,4)
DC70a 0.200 +25°C
DC70b 0.200 +60°C
DC70c 0.200 +85°C
DC70d 1.45 +125°C
DC70e
0.095
0.200
A
-40°C
3.3V
DC70f 0.200 +25°C
DC70g 0.200 +60°C
DC70h 0.200 +85°C
DC70i 1.55 +125°C
DC71
0.35
0.55
A
-40°C
1.8V
Deep Sleep Watchdog Timer:
DSWDT (SOSC – LP)
(6)
DC71a 0.55 +25°C
DC71b 0.55 +60°C
DC71c 0.55 +85°C
DC71d 1.70 +125°C
DC71e
0.55
0.75
A
-40°C
3.3V
DC71f 0.75 +25°C
DC71g 0.75 +60°C
DC71h 0.75 +85°C
DC71i 2.10 +125°C
DC72
0.005
0.200
A
-40°C
1.8V
Deep Sleep BOR (DSBOR)
(6)
DC72a 0.200 +25°C
DC72b 0.200 +60°C
DC72c 0.200 +85°C
DC72d 0.200 +125°C
DC72e
0.010
0.200
A
-40°C
3.3V
DC72f 0.200 +25°C
DC72g 0.200 +60°C
DC72h 0.200 +85°C
DC72i 0.200 +125°C
TABLE 29-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD): PMD Bits are Set, PMSLP Bit is ‘0’
(2)
Note 1: Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as outputs and set low.
WDT, etc., are all switched off.
3: The  current is the additional current consumed when the module is enabled. This current should be added to
the base I
PD current.
4: Current applies to Sleep only.
5: Current applies to Sleep and Deep Sleep.
6: Current applies to Deep Sleep only.