Datasheet

 2011-2013 Microchip Technology Inc. DS30001037C-page 181
PIC24F16KL402 FAMILY
REGISTER 23-7: FICD: IN-CIRCUIT DEBUGGER CONFIGURATION REGISTER
R/P-1 U-1 U-1 U-0 U-0 U-0 R/P-1 R/P-1
DEBUG
— — — — — ICS1 ICS0
bit 7 bit 0
Legend:
R = Readable bit P = Programmable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 7 DEBUG
: Background Debugger Enable bit
1 = Background debugger is disabled
0 = Background debugger functions are enabled
bit 6-5 Unimplemented: Read as ‘1’
bit 4-2 Unimplemented: Read as ‘0’
bit 1-0 ICS<1:0:> ICD Pin Select bits
11 = PGEC1/PGED1 are used for programming and debugging the device
(1)
10 = PGEC2/PGED2 are used for programming and debugging the device
01 = PGEC3/PGED3 are used for programming and debugging the device
00 = Reserved; do not use
Note 1: PGEC1/PGED1 are not available on PIC24F04KL100 (14-pin) devices.