Datasheet

PIC24F16KA102 FAMILY
DS39927C-page 130  2008-2011 Microchip Technology Inc.
REGISTER 15-2: PADCFG1: PAD CONFIGURATION CONTROL REGISTER
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8
U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
— — — SMBUSDEL
(3)
OC1TRIS
(2)
RTSECSEL1
(1,4)
RTSECSEL0
(1,4)
—
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-5 Unimplemented: Read as ‘0’
bit 3 OC1TRIS: OC1 Output Tri-State Select bit
(2)
1 = OC1 output will not be active on the pin; OCPWM1 can still be used for internal triggers
0 = OC1 output will be active on the pin based on the OCPWM1 module settings
bit 0 Unimplemented: Read as ‘0’
Note 1: To enable the actual RTCC output, the RTCOE (RCFGCAL) bit needs to be set.
2: To enable the actual OC1 output, the OCPWM1 module has to be enabled.
3: Bit 4 is described in Section 17.0 “Inter-Integrated Circuit (I2C™)”.
4: Bits 2 and 1 are described in Section 19.0 Real-Time Clock and Calendar (RTCC).