Datasheet

© 2009 Microchip Technology Inc. Preliminary DS39937B-page 195
PIC24F04KA201 FAMILY
TABLE 26-10: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
Param
No.
Sym Characteristic Min Typ
(1)
Max Units Conditions
V
OL Output Low Voltage
DO10 All I/O Pins — — 0.4 V I
OL = 6.5 mA, VDD = 3.6V
——0.4VI
OL = 3.5 mA, VDD = 2.0V
DO16 OSC2/CLKO — — 0.4 V I
OL = 8.0 mA, VDD = 3.6V
——0.4VI
OL = 4.5 mA, VDD = 1.8V
V
OH Output High Voltage ———— —
DO20 All I/O Pins 3 — — V I
OH = -3.0 mA, VDD = 3.6V
1.8 — — V I
OH = -1.0 mA, VDD = 2.0V
DO26 OSC2/CLKO 3 — — V I
OH = -2.5 mA, VDD = 3.6V
1.8 — — V IOH = -1.0 mA, VDD = 2.0V
Note 1: Data in “Typ” column is at 25°C unless otherwise stated. Parameters are for design guidance only and are not
tested.
TABLE 26-11: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
Param
No.
Sym Characteristic Min Typ
(1)
Max Units Conditions
Program Flash Memory
D130 EP Cell Endurance 10,000
(2)
——E/W
D131 VPR VDD for Read VMIN —3.6VVMIN = Minimum operating voltage
D132 V
PEW Supply Voltage for
Self-Timed Writes
2.2 — 3.6 V
D133A T
IW Self-Timed Write Cycle Time — 2 — ms
D134 TRETD Characteristic Retention 40 — — Year Provided no other specifications are
violated
D135 I
DDP Supply Current During
Programming
—10—mA
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.
2: Self-write and block erase.