Datasheet

PIC24F04KA201 FAMILY
DS39937B-page 192 Preliminary © 2009 Microchip Technology Inc.
DC62
0.450
0.650
μA
-40°C
1.8V
Timer1 w/32 kHz Crystal: T132
(SOSC – LP)
(3)
DC62a 0.650 +25°C
DC62b 0.650 +60°C
DC62c 0.650 +85°C
DC62d
0.730
0.980
μA
-40°C
3.3V
DC62e 0.980 +25°C
DC62f 0.980 +60°C
DC62g 0.980 +85°C
DC64
5.5
7.10
μA
-40°C
1.8V
HLVD
(3,4)
DC64a 7.10 +25°C
DC64b 7.80 +60°C
DC64c 8.30 +85°C
DC64d
6.2
7.10
μA
-40°C
3.3V
DC64e 7.10 +25°C
DC64f 7.80 +60°C
DC64g 8.30 +85°C
DC63
4.5
6.60
μA
-40°C
3.3V
BOR
(3,4)
DC63a 6.60 +25°C
DC63b 6.60 +60°C
DC63c 6.60 +85°C
TABLE 26-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD): PMD Bits are Set, PMSLP Bit is ‘0’
(2)
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and pulled
high. WDT, etc., are all switched off.
3: The Δ current is the additional current consumed when the module is enabled. This current should be added to
the base I
PD current.
4: Current applies to Sleep only.
5: Current applies to Deep Sleep only.