Datasheet

© 2009 Microchip Technology Inc. Preliminary DS39937B-page 191
PIC24F04KA201 FAMILY
TABLE 26-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD): PMD Bits are Set, PMSLP Bit is ‘0’
(2)
DC60
0.025
0.200
μA
-40°C
1.8V
Base Power-Down Current
(Sleep)
(3)
DC60a 0.200 +25°C
DC60b 0.870 +60°C
DC60c 1.350 +85°C
DC60d
0.105
0.540
μA
-40°C
3.3V
DC60e 0.540 +25°C
DC60f 1.680 +60°C
DC60g 2.450 +85°C
DC70
0.020
0.150
μA
-40°C
1.8V
Base Deep Sleep Current
DC70a 0.150 +25°C
DC70b 0.430 +60°C
DC70c 0.630 +85°C
DC70d
0.035
0.300
μA
-40°C
3.3V
DC70e 0.300 +25°C
DC70f 0.700 +60°C
DC70g 0.980 +85°C
DC61
0.55
0.65
μA
-40°C
1.8V
Watchdog Timer Current: WDT
(3,4)
DC61a 0.65 +25°C
DC61b 0.65 +60°C
DC61c 0.65 +85°C
DC61d
0.87
0.95
μA
-40°C
3.3V
DC61e 0.95 +25°C
DC61f 0.95 +60°C
DC61g 0.95 +85°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and pulled
high. WDT, etc., are all switched off.
3: The Δ current is the additional current consumed when the module is enabled. This current should be added to
the base I
PD current.
4: Current applies to Sleep only.
5: Current applies to Deep Sleep only.